SEBALD MODELLBAU Kamiras

The flying wing for the hiking backpack and for all who prefer a model with an extraordinary flight pattern. The thin profile and aerodynamic fuselage promise a high speed range and very good thermal performance. Despite the low weight, the Kamiras lies true to track in the air and can be flown without problems even in stronger winds.

The simplest and most effective method of stringing is to apply colored parcel tape. The procedure is described in detail in the instructions.
Alternatively, silk can be applied with white glue or parquet varnish (water-based), but this requires sufficient experience.

Features:

• Very light and stable construction
• Wings are plug-in with Cfk tube
• Wing plugging is already built into the fuselage and the wing
• Optimized weight distribution
• No soldering required with 16cm extension cable
• The fuselage is built using the proven Depron plywood construction method
• Very thin profile with excellent thermal performance
• Hook for flit launch can be screwed on