4 645 models

(5 539 icons in the database)

ASK FOR A NEW MODEL TO BE ADDED

Although we do our best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask us to add it. Please be patient, we may take a few days to work on your model and gather information.

Ask for a new model

New Web Site

Welcome to the new site—a merger of AIR-RC and SkyRaccoon. AIR-RC will soon be phased out, but all its content will remain. The redesigned site may have a few bugs and take some getting used to, but the overhaul will make it easier to improve and expand in the future.

THANK YOU

A simple “thank you” or a kind message is our first reward. If this site is useful to you and you'd like to support the project, feel free to get in touch.

HAPPYMODEL Moblite7 1S

Radio-Controlled Multicopters for RC Pilots

Overview

Features:

The lightest 1s 75mm brushless whoop
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell EX0802 brushless motors
Low profile Canopy design
VTX power switchable 25mw~200mw

Video

Images

Where to buy

🎛 Generate radio icon

Flight Skill

Intermediate

Build Skill

RTF/BNF

Specifications

Wheelbase: 75mm
Size: 97x97x25mm
Weight: 19.5g (without battery)
Weight: 36g (with Original 1s 650mah Lipo battery )

Motor	Model: EX 0802 19000KV ( New Unibell Version) Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.Len): Φ10.5mm14.9mm Weight(g): 1.7g No.of Cells(Lipo): 1S only
Flight Controller	(Frsky SPI RX Version) DiamondF4 FR FC Firmware Target: CrazybeeF4FR MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000 (SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC
Onboard 4in1 ESC	MCU Upgraded to EFM8BB21 Power Supply: 1S LiPo/LiPo HV Current: 5A continuous, peak 6A (3 seconds) Support BLHeliSuite programmable Factory Firmware: O_H_50_REV16_8.HEX Default Protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version	SPI BUS Receiver Frsky D8 Compatible Compatible Non EU transmitter D8 model Channels: 8CH Failsafe Support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky Receiver Version	SPI BUS Receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8CH (AFHDS) or 14CH (AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe Support
Onboard 5.8G 40CH 25-200mW VTX	Output Power: 25mw~200mw switchable Frequency: 40CH Input Voltage: 3.3V 5.5V Current Consumption: 300mA (type) Frequency: 5.8GHz 5bands 40 channels (include Race band) Smartaudio Ready
Runcam Nano 3 FPV Camera	Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mmW14mmH9mm
Lipo Battery	Capacity: 650mAh Voltage: 3.8V Continuous Discharge Rate: 30C Instantaneous Discharge Rate: 60C Size: 60mmx18mmx8mm Weight: 16g Connector: PH2.0 Quantity: 2 PCS