TDM MODELS Polikarpov I-16 Type 24

The wing is all balsa and assembled flat on the work bench. Templates for all wing ribs are included on the plans. The horizontal stabilizer, elevators and vertical fin are all 1/8" balsa components.

The fuselage is built-up balsa, assembled over an internal removable jig. Formers are 1/16" plywood and 1/16" balsa. The fuselage is sheeted with 1/16" balsa. Templates for fuselage sheeting are included on the plans as well as an instrument panel drawing and scale M-63 radial engine. 1/16" Sheeting for the fuselage and top of the wing is not included in the laser cut parts set.

Plans available on TDM Models