D-POWER MODELLBAU Streamline 350

STREAMLINE 350 from D-POWER is a powerful glider model with floating elevator and versatile flying abilities. The modified wing profile MH32 and the set angle of attack provide maximum stability and good flight characteristics. The model handles all acrobatic elements and can also slide well in thermals. Thanks to the highly deflectable landing flaps controlled by the linkages from above, the model can fly slowly, with a safe landing speed.

The fuselage is made of fiberglass, foam polystyrene wings covered with Abachi wood and Oracover® foil.

The model comes in an ARF + design - it does not have a pre-installed drive or servo drive to choose according to your preferences, but servo extension cables are installed in the fuselage and wings to keep the model ready for the flight as long as possible time to spend flying at the airport.

Features:

• Sporty branch steadily mastering acrobatics and sailing in thermals
• ARF + execution - very short building time
• Three-color hull of fiberglass
• In the fuselage there are suction openings and exhalations for good cooling of the drive unit
• Wing with polystyrene core coated with balsa and Oracover® foil and contrasting strips for good visibility
• The wing is fixed with MULTIlock® from Multiplex
• Suitable for operation with outruner motors with an outside diameter of 42mm
• Installed carbon motor bulkhead for outruner motors Axi 2826/13 V2 or Axi 2830/12 V2 LONG.
• Removable cab for convenient access to the fuselage without removing the wing
• Pre-installed servo extension wires including MPX connector between fuselage and wing
• In the fuselage stretched rods Vop and Sop
• In the fuselage glued plywood, laser carved, partition for all electronics
• It includes an aluminum cone fitting to the fuselage