North American P-51D Mustang from 3D LabPrint


Fully 3D printable RC model of the classic plane, designed in 100% vase mode (retraction free) for printing mainly with PolyLight 1.0 LW-PLA active foaming filament (some parts PolyAir, PETg and flex), that allow printed planes to be lighter than any other RC plane building technique (1500g weight with wingspan 1.4m). Many scale details such as airframe plating Get ready for flying with this great performing flying legend!

Parts printed from this LW-PLA are light, easily sanded and glued together. This model requires only about 300g of this material, that means it’s a very cheap build. In case of accident, parts can be easily reprinted with just a filament cost.

We’ve been testing this material for a years before this plane was released… The material is using an active foaming technology to achieve lightweight, low density PLA parts. At around 230°C this material will start foaming, increasing its volume by nearly 3 times.

Almost all parts of this plane should be printed from LW-PLA (some specific parts needs PolyAir PLA, flex or PETg).

Both the wing and fuselage features extensive hitech 3d structural reinforcement, making the model very rigid, yet maintaining lightweight airframe and exact airfoil, even it is made only from plastic. This perfect and exact 3d structure is possible thanks to additive 3dprinting technology only.

Easy to assemble, without need of any extra tool or hardware. Just glue printed parts together. The rest of the assembly is very easy. Simply add brushless motor, ESC, servos and radio system. 



Radio icons

FrSky X20

FrSky XE

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X10

FrSky X12s

JPG (155x100)

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the North American P-51D Mustang in particular but at least we know they do distribute 3D LabPrint.

Wingspan: 1395mm (54.9 in)
Length: 1220mm (48 in)

Weight: 1500 g (3.3 lbs)
  • Wingspan: 1395 mm / 55 inch
  • Length: 1220 mm / 48 inch
  • Height: 600 mm / 27 inch
  • Wing area: 40,7 dm2 / 4.38 square feet
  • Wing loading: 34.7 g/dm2
  • Center of gravity: 100 mm / 3.9 inch from leading edge
  • Airfoil: LHK508 modified by 3DLabPrint
  • Print weight (LW PLA): 776 g / 27.37 oz (including discs and tyres)
  • Empty weight (w/o battery): 1300 g / 45.86 oz
  • Takeoff weight (3s 2200 lipo): 1500 g / 52.91 oz
  • Never exceed speed VNE: 160 km/h / 99 mph
  • Design maneuvering speed VA: 80 km/h / 50 mph
  • Stall speed, VS: 20 km/h /12 mph

Recommended Setup:

  • Motor: 3542 1000KV (for 3S setup)
  • ESC: 40-50A/3S
  • Propeller: two blade 12 x 6
  • Battery: Li-Po 2200mAh / 3S printed PETg motor mount
4,597 models
(55,164 icons in the database)

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website

Ask for a new model

AR Wing Pro
Dynamic 60
Arctic Cat

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

SkyRaccoon and AIR-RC are the largest online databases about RC Model Flying and it's growing...
Each model has description, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
Copyright SkyRaccoon © 2024