These files are large, so be patient during the download. Please read the readme.txt included in the ZIP
Lark is a high-performance 3D-printed UAV designed for versatility and efficiency. Featuring a classic layout with a pusher propeller and tail boom, it has been thoroughly tested in real flights and through CFD analysis to ensure reliability. The modular nose section is detachable, allowing users to install different cameras, sensors, or payloads, with the standard setup supporting a 19x19mm FPV camera and VTX. Design files are provided in STL and key STEP formats, making customization easy.
Optimized with an Eppler E193 airfoil and a center of gravity positioned 66mm from the leading edge, Lark flies most efficiently at 50–60 km/h. With the recommended motor, propeller, and a 4S battery, it cruises at about 30% power, drawing roughly 4A and achieving flight times exceeding 4 hours. A 3S battery can also be used, offering flexibility in setup. The aircraft supports both manual and autonomous flight configurations, making it a highly adaptable aerial platform.
FrSky X20
FrSky XE
PNG (300x280)
BMP Recommended (300x280)
FrSky X18
FrSky Twin
PNG (180x166)
BMP Recommended (180x166)
FrSky X10
FrSky X12s
PNG (180x160)
BMP Recommended (180x160)
PNG (192x114)
FrSky X9D
FrSky X9E
BMP (64x32)
JPG (155x100)
Some content in menu 2.
Although I do my best to complete this library, you may not find the model you are looking for.
In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.
I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website
Ask for a new model
A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.