The Planeprint AERON is a high-performance glider based on the successful class of F3B and F3K competition models. It feels equally at home on the slope as it does on flat terrain, and the option of building it with a motor or as a pure glider makes it a flight model for a wide range of uses.

The Wing is elliptically designed and corresponds to the current state of aerodynamics. In contrast to the RISE with 4-flap wing - which is a super light thermal glider - the AERON has a much more stable construction (PROFILE_5_Gyroid) and higher wing load. It can be used faster and at higher wind speeds, but is not a hotliner. Acro maneuvers are no problem and its maneuverability also allows soaring on small slopes.

With a wingspan of 2300 mm and the demountable V-tail, it can be compactly disassembled and taken anywhere. Due to the relatively wide wing in the middle area, the stall and landing characteristics are absolutely easy and especially landings with tailwind on the slope are unproblematic. This and the optimized carbon reinforcement in the fuselage make the AERON very resistant for a 3D-printed model and suitable for everyday use.

The 4-flap-wing can be extensively programmed and we recommend several flight phases on Aileron and flaps to get the maximum performance.



Radio icons

FrSky X20

FrSky XE

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X10

FrSky X12s

JPG (155x100)

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the Aeron in particular but at least we know they do distribute PLANEPRINT.

Where to buy

Wingspan: 2300mm (90.6 in)
Length: unknown

Weight: 1680 g (3.7 lbs)
  • Wingspan: 2300 mm (90.5 inches)
  • Flight weight: 1680 grams
  • Wingload: 30g/dm2
  • 7 channel
  • Glider and 3S Motor version
  • Material: LW-PLA 800g/PLA 300g/TPU 10g
  • Printer space of 200x200x200 mm (cube) needed!
  • Slicing works best with CURA
4,561 models
(54,732 icons in the database)

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website

Ask for a new model

F-100 Super Sabre
YAK54 60"
Nieuport 17
Alpha Strike

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

SkyRaccoon and AIR-RC are the largest online databases about RC Model Flying and it's growing...
Each model has description, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
Copyright SkyRaccoon © 2024