Venus 3D from TechOne Hobby

Details

A highly advanced 'profile' style 3D model that is far, far more than just the usual foam sheet. The whole model is moulded in EPO foam for durability and minimal weight. This method of moulding leaves strength where it is needed and minimal foam where it is not. Unlike normal 'profile' models, the Venus 3D incorporates a special plastic nose moulding/motor mount to spread the shock of impacts to more of the structure. Just behind it is a special internal compartment for both the ESC and 2S Li-Po battery. The magnetic hatch renders them invisible during flight. What other profile style model offers that?

On the performance front, the Venus 3D delivers that in spades! The ultra slow speed performance is predictable and dramatic, thanks to the large aileron, elevator and rudder surface areas. The deep fuselage provides great lift for extended knife edge flight.

Wing side force generators are standard and drag brakes for the ailerons are supplied if you need/want them.
The durable nature of the construction makes the Venus 3D suitable for outdoor flying as well on calm days. You can really explore that 'over 1:1' power to weight ratio then!

The recommended servos provide the right amount of power combined with low weight to make the Venus 3D shine in the most dramatic aerobatic. The 9g servo needs a small adjustment to the foam aperture to allow fitment. 10 seconds with a sharp knife will have it sorted!!!
 

Pictures

Radio icons

FrSky X20

FrSky XE

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X10

FrSky X12s

JPG (155x100)

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the Venus 3D in particular but at least we know they do distribute TechOne Hobby.

Wingspan: 828mm (32.6 in)
Length: 970mm (38.2 in)

Weight: 250 g (8.8 oz)
Wingspan 828mm (32.6")
Length 970mm (38.2")
Weight 210-250g
Servos 2 x 6g plus 1 x 9g Required
Motor TechOne AT22016 1500kV Required
ESC 10-12A Brushless ESC Required
Battery 2S 7.4V 450mAh 25C Required
EnglishFrenchGermanItalianPortugueseRussianSpanish
4,579 models
(54,948 icons in the database)
ASK FOR A NEW MODEL TO BE ADDED

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website

Ask for a new model

RANDOMIZER
Pitts EPP
Junkers Ju-52
Goblin Raw 420 Competition
RX120 2S
FRSKYX14_2312
ALTUS_2404
GOGGLEX_2311
PENGUIN_2307
CINELOG25_2310
X20AWE_2403
NOTE

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

SkyRaccoon and AIR-RC are the largest online databases about RC Model Flying and it's growing...
Each model has description, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
SKYRACCOON
Copyright SkyRaccoon © 2024