Booby from Wowings


The Booby is a RC flying wing glider designed for slope soaring. Our new 2005 design update with modified planform and new specially designed airfoil section has improved it's all-round performance significantly. It has a broader speed range and improved turning performance. It can now be slowed down a little easier for landings and lighter lift conditions but it's awesome top speed has still been maintained, if not increased!

The Booby is a very fast flyer and retains speed through turns very well. It will fly fine in around 10 knots of wind on a good slope but 15 to 20 knots is ideal. It can comfortably handle up to around 30 knots of wind without any additional ballast weight. It has been designed for intermediate to advanced flyers seeking a top performing wing that will stand out from the crowd. With it's very unusual appearance and impressive flying performance it's sure to grab everyone's attention!


  • CNC cut EPP foam wing panels for incredible durability
  • 9mm (approx. 3/8") diameter fiberglass spar for in-flight rigidity
  • Wide (up to 60mm, or 2 3/8") balsa elevator and ailerons with tapered cross-section for superior integration with airfoil
  • Pre-marked coreflute for fins
  • Quality Dubro pushrods and connectors
  • Detailed construction manual with photos



Radio icons

(Click on the icon you want to download)
Horus OpenTx
Horus FrOs
FrSky X20/X20s/XE Ethos
FrSky X18/X18s Ethos

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the Booby in particular but at least we know they do distribute Wowings.

Where to buy

check web site
Ship to: Worldwide

Wingspan: 1200mm (47.2 in)
Length: unknown

Weight: 840 g (1.9 lbs)
  • Wingspan: 1200 mm. (47 inches)
  • Typical flying weight: 840 grams (29.6 ounces)
  • Typical wing loading: 30.7 g/dm^2 (10.1 oz/ft^2)

Radio requirements:

  • Transmitter and receiver (minimum 2 channel)
  • Receiver battery pack in flat configuration
  • Two (2) standard size servos (eg.BlueBird BMS-621 or Hitec HS-322)
  • One (1) mini size or metal geared micro size servo (eg. BlueBird BMS-380MG, Hitec HS-85MG)
  • One (1) 300mm (12") servo extension lead
  • One (1) “Y” lead.

Kit construction requirements :

  • 48mm (approx. 2") wide cross-weave filament tape
  • 48mm (approx. 2") wide coloured covering tape or iron-on covering (eg. UltraCote or ProFilm)
  • 3M Super 77 ("multi-purpose") spray adhesive
  • Various glues (eg. 5 minute epoxy, goop/goo, hot-melt glue)
  • Utility knife (large disposable retractable variety is ideal).
  • Sandpaper and basic tools (screwdrivers, pliers etc.)
  • 1mm (approx. 1/16") thick lead flashing for nose weight


Booby (Multicolor)
3,482 models in library now


Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website

Ask for a new model


T-28 Trojan
AlWind 20
Marchetti SF-260


I'm not asking for anything, I don't place any advertising and a simple 'thank you' or a kind message is my first salary.
That said, if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.


SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: fabioe
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: fabioe
SOURCE: fabioe
SOURCE: Romushock
SOURCE: SkyRaccoon
SOURCE: fabioe
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: fabioe
SOURCE: fabioe
SOURCE: SkyRaccoon
SOURCE: fabioe
SOURCE: fabioe
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: SkyRaccoon
SOURCE: fabioe
SOURCE: fabioe
SkyRaccoon and AIR-RC are the largest online databases about RC Model Flying and it's growing...
Each model has description, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We are not selling anything, it's made by RC hobbyists for RC hobbyists. Enjoy !
Copyright SkyRaccoon © 2022