These files are large, so be patient during the download. Please read the readme.txt included in the ZIP
The Phantom is the newest addition to our range of First Person View (FPV) models. It is a great flyer with very predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use.
The Phantom features tough EPO construction with moulded in camera bays - one forward looking just under the nose and another mount in the top of the canopy with a plywood support pre-installed. This updated version features premium 3K wrapped carbon tube spars, and now breaks down into three pieces for easy transport.
Assembly of the airframe is very simple, literally four glue joints required - foam glue is also included!
This being the kit version you will require your own choice of 9gram servos, motor and speed controller - we suggest a low current power system not exceeding 30 amps, this will provide you with flights in excess of 30 minutes on a 3s 4500mAh lipo. FPV pilots will appreciate the space under the canopy - it's cavernous! There is plenty of space for your choice FPV gear.
Features: • Kit Version - Assemble and install your choice of electronics • Ultra though EPO construction • Ultra stable flight performance • Excellent FPV platform • 30 minute plus flight duration on 4500mAh 3s lipo • Easy to Hand Launch, Easy to Land • Stable Handling at Low and High Speeds • Updated with 3K wrapped carbon tube spars • Updated with removable outer wing panels for easy transport
FrSky X20
FrSky XE
PNG (300x280)
BMP Recommended (300x280)
FrSky X18
FrSky Twin
PNG (180x166)
BMP Recommended (180x166)
FrSky X10
FrSky X12s
PNG (180x160)
BMP Recommended (180x160)
PNG (192x114)
FrSky X9D
FrSky X9E
BMP (64x32)
JPG (155x100)
Some content in menu 2.
Recommended equipment 4 Channel Radio (with delta mixing) 3S 11.1V 4500mAh~5200mAh Lipoly battery 2 x 9g servos 50~60amp Esc 2835 2814 2820 900kv~1250kv Brushless Outrunner Motor
Although I do my best to complete this library, you may not find the model you are looking for.
In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.
I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website
Ask for a new model
A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.