Volador VD6 Deadcat from FlyFish RC


Volador series are specifically designed for FPV freestyle and cinematic. Available in two configurations: VX6 and VD6. Made with CNC aluminum alloy parts and high-quality T700 carbon.These frames have undergone countless design improvements and extensive testing to create ultra-crash resistant, which fit up for beginners and professional pilots.

Volador VD6 adopts Squashed X design for maximum control and precision, while Volador VD6 is the Deadcat style frame that lets you get props out of the view. 20x20mm and 30.5x30.5mm stack mounting holes, 20x20mm, 25x25mm VTX mounting makes this frame super convenient! The unique easy-swap arm design and tight-fitting structure design reduce the resonance to the minimum. The high-quality TPU parts adds up to the comfort of use and make the build look very neat and snug.

The power lead getting chewed up by propellers during flight. How many times has this happened to people because of improper mounting or crashes? That’s why we have integrated the XT60 connector on the rear of the Volador Frame to allow you to plug the battery easily and, most importantly, eliminate any chances of the cable damage by props or any sort of impact.

A very interesting a novel arm design has been implemented, where the arms are slightly thickened on the sides in the middle, where arms usually tend to break in hard crashes. This provides additional strength and rigidity, ultimately saving you spending additional funds on replacement parts in the long run.

Volador 6” is made of high-strength T700 carbon. The surface of the carbon plates is delicate and smooth, and every part of the frame is carefully chamfered to protect cables from scratches or even your palms and fingers during the building process.

Another interesting little detail of our frame is the unique anti-skid battery pad. We have found a way to make such a cool looking battery pad with our logo on it without increasing the overall cost and making it incredibly “sticky”.

We thought there’s another very important part of the quad that needs better protection. The FPV camera. And that’s why we are using aluminum alloy CNC camera plates. Aside from providing better protection for the camera, it looks very slick as well!
We’ve put huge effort into the TPU parts. They fit the frame fantastically, increase the overall frame durability, and again, look very slick! This is something we take a big pride in!
The frame comes with 12.9-level strength hardware with Loctite thread locker to make for more reliability.


  • High quality T700 carbon plate
  • 7075 aluminum alloy camera mounting plates for enhanced protection
  • Cleverly designed thickened arms
  • The integrated XT60 connector for safety and reliabililty
  • High quality TPU parts
  • Unique anti-slip battery pad
  • 12.9 strength hardware coated with Loctite
  • Compatible with DJI O3 Air Unit/Caddx Vista/Runcam link Wasp/Avatar HD, etc
  • (Not compatible with DJI FPV Air Unit)



Radio icons

FrSky X20

FrSky XE

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X10

FrSky X12s

JPG (155x100)

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the Volador VD6 Deadcat in particular but at least we know they do distribute FlyFish RC.

Where to buy

Wingspan: 216mm (8.5 in)
Length: 159mm (6.3 in)

Weight: 261 g (9.2 oz)

Arm Thickness: 6mm
Top plate thickness: 2.5mm
Middle plate thickness: 3mm
Bottom plate thickness: 3mm
Propeller size: 6~6.1 inch
Material: T700 carbon plate
FPV cam spacing: 19mm/20mm
Weight: 216.1g(with TPU parts)  Wheelbase: 260mm
Total Dimensions: 209mm*159mm  
Stack mounting holes: 20mm*20mm/30.5mm*30.5mm(M3)
VTX mounting holes: 20mm*20mm/25.5mm*25.5mm(M2)

4,564 models
(54,768 icons in the database)

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website

Ask for a new model

DHC-6 Twin Otter
210SX - Tank Edition
CineQueen 4K 3inch
Puma II

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

SkyRaccoon and AIR-RC are the largest online databases about RC Model Flying and it's growing...
Each model has description, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
Copyright SkyRaccoon © 2024