These files are large, so be patient during the download. Please read the readme.txt included in the ZIP
The H-King Crusader 30E is based on the classic stick design. The model can be flown by pilots of all skill levels, from beginners to experts. The Aircraft is constructed from lightweight ply and balsa and expertly covered with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local flying club.
The Crusader not only looks the part but also has excellent flight characteristics. It will deliver stable flights from low speed up to top speed. If you want to experience all flying capabilities it will deliver a full range of sport acrobatic maneuvers with ease.
As this is an ARF (Almost Ready to Fly) there will be some assembling required as with most ARF models. You will also need to install your power system and radio equipment. It is recommended that you run a 2216-980KV motor with a 30A ESC (with BEC) and a 10x5 propeller running on a 2200mAh 3S Lipo battery with your choice of radio and receiver. 9g servos provide ample control and will complete the fit out.
Features: • Broad flight envelope, good for beginner and sports flyers alike • All balsa and light plywood construction • Easy to fly and with excellent flying characteristics • Large battery compartment for easy swapping battery packs • Strong, yet light aluminum landing gear • High quality covering film with high contrast color scheme • Full 4 channel control: Elevator, rudder, throttle and aileron
FrSky X20
FrSky XE
PNG (300x280)
BMP Recommended (300x280)
FrSky X18
FrSky Twin
PNG (180x166)
BMP Recommended (180x166)
FrSky X10
FrSky X12s
PNG (180x160)
BMP Recommended (180x160)
PNG (192x114)
FrSky X9D
FrSky X9E
BMP (64x32)
JPG (155x100)
Some content in menu 2.
Wingspan: 1200mm Length: 1000mm Flying weight: ~990g
Requires: 1 x 2830 (2216 Stator Size) 980-1100KV Brushless Outrunner Motor 1 x 30A ESC with BEC 1 x 10x5 Propeller 4 x 9g Servos 1 x 3S 11.1V 2200mAh Lipo Battery 1 x 4~6 channel Radio Transmitter and Receiver
Although I do my best to complete this library, you may not find the model you are looking for.
In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.
I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website
Ask for a new model
A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.