These files are large, so be patient during the download.
Please read the readme.txt included in the ZIP
With this Micro SU-27 you get a lot of fun in a small package, great for indoor flying or outside on a calm or light wind day. The SU-27 is packed full of features such as a DSM2 compatible receiver and ESC, super sensitive 6 axis gyro with self levelling function, attitude and voltage sensor, 2 x 2g micro servos and a 1103 8200kv brushless motor with prop. The gyro has 3 mode settings available, self levelling, stabilized and off so that you can fly the SU-27 according to your abilities.
It comes out of the box just about completely ready made (see note below) and ready to bind to a DSM2 compatible transmitter and it is made of tough but lightweight PP foam with carbon strip reinforcement. It also comes very nicely finished in an eyecatching color scheme and due to the 6 axis gyro it is suitable for beginners as well as seasoned flyers. All you need apart from a suitable DSM2 transmitter is a 7.4V 150~180mah 25~30C lipo battery. You will then be required to bind the receiver to the transmitter and go through the gyro set-up procedure, once this is done you will be ready to fly. Despite it's small size it is very stable in the air and once you have gained experience with it you can fly it in a moderate breeze.
Note: It is ready made but you are required to glue into place the 2 vertical fins and screw the 2 elevons directly to the servo units. These have been left off to avoid them getting damaged in the box when being shipped.
Some content in menu 2.
Type: Micro SU-27 w/6 Axis Gyro DSM2 Compatible 300mm (11.8") PNF
Wingspan: 300mm (11.8")
Length: 360mm (14.2")
Flying Weight: 38g (1.34oz)
Motor: 1103 8200kv brushless outrunner
Servo: 2 x 2g
Radio Compatbility: DSM2
Gyro: 6 axis super sensitive with 3 modes
Attitude and Voltage Sensor: Yes
Material: PP foam with carbon reinforcement
Assembly Time: Minimum assembly required (then it's just binding Rx and setting up the gyro as shown in the manual)